NavCom SF-3050 Rev.E - Manual (Page 134)

SF-3050 Product User Guide
– Rev E
4-108
3006LF) to COM2 - USB of the SF-3050. Connect
the USB plug end to the control device.

Figure 73 shows a common configuration with
the control device connected to COM1 - LAN
and an auxiliary device connected to
COM2 - USB for data logging.

Some devices may require an additional
adapter. The optional interface data cables
support USB 2.0 Device and Host, Ethernet,
and RS-232 and RS-422 (refer to Table 13).
The receiver is configured as a DCE device.
Figure 73: Communication Port Connections