NavCom SF-3050 Rev.E - Manual (Page 18)

SF-3050 Product User Guide
– Rev E
xvi
Bluetooth configuration; updated
Positronic socket type connector part
number:
was: P/N FR11FP9ZZLM0/AA
is: P/N FR11FP922LM0/AA
Updated description of the LOGFILE
command parameters; added Note
referring user to Appendix C of the
Sapphire Technical Reference Manual;
updated the “Direct Ethernet Connection
via Static IP Address” section: added that
SF-3050 supports TCP connection in
addition to UDP; referred user to Chapter
2 of the StarUtil 3000 User Guide for
detailed instructions on configuring
Ethernet connection
Chapter 5:
Added “Setting Up a StarFire
Priority Network” section; updated “User
Profiles” section; in section
“Reassignment of StarFire Network List”,
added table numbers to the tables and
links to those tables
Appendix A:
in “Features” section: added
MBRTK and Heading; added Heading
Slew to
“Measurement Performance” and
updated Velocity for all DGPS modes;
added PDOP disclaimer; added Note
about RTK Extend being required only on
Rover receiver; added Note referring user
to Chapter 5 of the StarUtil 3000 User
Guide ;updated User-Programmable
Output Rates table to include Bundle A;
added Bundle A to note re default PVT
and Raw Data Rate;
added “Networked
Transport of RTCM Internet Protocol
(NTRIP) Setup” section; added Heading
and Slew degrees to “Measurement
Performance” table
Appendix B: added antenna info for L1
Appendix C:
in “Infrastructure” section:
changed statement “GPS satellites
transmit navigation data on two L-Band
frequencies” to “GPS satellites transmit