NavCom SF-3050 Rev.E - Manual (Page 56)

SF-3050 Product User Guide
– Rev E
1-30
Confirm StarFire Navigation
77. Click Position, Velocity & Time on the Detailed
Views menu (see Figure 30) to determine if the
receiver is navigating in StarFire mode. The PVT
tab opens (see Figure 37).

The receiver enters StarFire mode
approximately 3 minutes after it is first turned
on; then the convergence period starts.
Figure 37: Nav Mode: StarFire

The Nav Mode: StarFire Dual:RTG: 3D: Dual
freq in Figure 37 indicates that the receiver is
navigating in StarFire dual frequency with a 3D
position fix, which is very accurate. RTG is
another term for StarFire (refer to the Glossary
at the end of this guide).
How to Cancel a StarFire License
At the time [CANCELSFLICENSE] is input, the
receiver must be tracking GPS satellites and
providing a valid position solution for the receiver to
accept the license cancellation.
78. Input the [CANCELSFLICENSE] command on the
Input Terminal window to cancel the current
StarFire license (see Figure 38).