NavCom SF-3050 Rev.E - Manual (Page 150)

SF-3050 Product User Guide
– Rev E
5-124
Verify License Is Saved
There are two ways to view StarFire license data to
verify that the license is saved:

StarUtil 3000

Sapphire Message SFLICENSEB (described in
the Sapphire Technical Reference Manual)
(Refer to Related Documents in the fore-matter.)
Verify this StarFire license data:

The StarFire license is saved as one of these
license types:
Primary StarFire License: Currently active
license
OR
Secondary (Backup) StarFire License:
Inactive license that becomes active at the
expiration of the Primary StarFire license

Duration of the saved license and the valid areas
of operation
For special-case scenarios, customers may request
to receive the StarFire license via email to manually
upload via StarUtil 3000. The request must be
specified in the P.O.

The broadcast procedure for Over the Air
StarFire Licensing is subject to change.
Setting Up a StarFire Priority Network
The SF-3050 defaults to using the highest available
satellite between both networks. If multiple receivers
are used on one platform, the user may force one to
use Net1 and the other to use Net2.