NavCom SF-3050 Rev.E - Manual (Page 152)

SF-3050 Product User Guide
– Rev E
5-126
Failed Search
Whether from loss of reception or lack of initial
acquisition, after a 5-minute failed search for a
StarFire satellite, the receiver automatically searches
for another available StarFire satellite.
This functionality only applies to:

Receivers licensed for both StarFire Net 1 and
Net 2

Receivers only licensed for StarFire Net 1 in
areas where signals from 2 StarFire satellites
overlap and may be available.
Reassignment of StarFire Network List
Satellites 609 and 643 have been reassigned to
provide improved reception. Satellite 609, which was
in Net1, is now in Net2, and satellite 643, which was
in Net2, is now in Net1 (see Table 23 and Table 24).
Table 23: StarFire Satellites v.1.0.1.5 and Earlier
Network Satellite ID Longitude
Satellite
Name
Uplink Site
Net 1
402 97.65W PAC-E Laurentides
609 109E IND-E Auckland
525 25E IND-W Burum
Net 2
358 142W PAC-C Santa Paula
643 143.5E PAC-W Perth
484 15.5W AOR-E Southbury
Table 24: StarFire Satellites v.2.0.15.0 and Later
Network Satellite ID Longitude
Satellite
Name
Uplink Site
Net 1
402 97.65W PAC-E Laurentides
643 143.5E PAC-W Perth
525 25E IND-W Burum
Net 2
358 142W PAC-C Santa Paula
609 109E IND-E Auckland
484 15.5W AOR-E Southbury