NavCom SF-3050 Rev.E User Manual
Page 39
Advertising

SF-3050 GNSS Product User Guide
– Rev E
1-13
Figure 10: Comparing Current and Installed Firmware
21. If the NAV firmware installed in the receiver is not
the most current version:
Check the versions of the other firmware.
Write down all of the firmware that must be
updated.
Go to the section below,
Determine Firmware Version via the Input
Terminal
22. Locate the Input Terminal on the bottom right (see
Old NAV Firmware
Current NAV Firmware
Advertising
This manual is related to the following products: