NavCom SF-3050 Rev.E - Manual (Page 28)

SF-3050 Product User Guide
– Rev E
1-2
Product Configuration Files
All the files needed to set up the ordered configuration
of the SF-3050 are included on the SF-3050 Product
Configuration USB Flash Drive (P/N 82-043000-0001).
The main product configuration files are:

Firmware (*.s19): The most current firmware.

Software Options (*.opt): The options enable the
functionality of the SF-3050. Software Options
may be purchased in a bundle and/or individually.

StarFire License (*.lic): The SF-3050 is hardware
ready for StarFire. The StarFire License and the
StarFire Software Option are required to enable
the StarFire Subscription Service.

The StarFire Software Option is standard for the
SF-3050 A, G, S, and M Software Bundles, and
may also be purchased individually. The StarFire
License is a purchased item in addition to the
StarFire Software Option.

StarUtil 3000 (Starutil 3000_v0,0,x.exe):
NavCom‟s Windows-based control program is
used to upload the product configuration files.

USB Driver (navcomx1c45x3050.inf)

User Profiles (*.npt): The SF-3050 is already
configured with a factory default User Profile. If
desired, replace the factory default user profile
with a predefined profile, or create a profile.
Predefined User Profiles are available on the USB
Flash Drive or by email.

Refer to Chapter 5/User Profiles for details.