NavCom SF-3050 Rev.E - Manual (Page 153)

SF-3050 Product User Guide
– Rev D
6-127
Chapter 6 .....................Safety Instructions
The SF-3050 GNSS sensor is designed for precise
navigation and positioning using the Global
Positioning System, GLONASS, and is designed for
Galileo when the constellation becomes commercially
available. Users must be familiar with the use of
portable GNSS equipment, the limitations thereof and
these safety instructions prior to use of this
equipment.
Transport
Always carry the NavCom equipment in either the
original packing material or packaging which provides
protection to the receiver and antenna against shock
and vibration.
Utilize all original packaging when transporting via
rail, ship, or air.
Maintenance
The NavCom equipment may be cleaned using a new
lint free cloth moistened with pure alcohol.
Connectors must be inspected, and if necessary
cleaned before use. Always use the provided
connector protective caps to minimize moisture and
dirt ingress.
Inspect cables regularly for kinks and cuts as these
may cause interference and equipment failure.
Damp equipment must be dried at a temperature less
than +40 C (104 F), but greater than 5 C (41 F) at
the earliest opportunity.