NavCom SF-3050 Rev.E - Manual (Page 46)

SF-3050 Product User Guide
– Rev E
1-20

Upload Boot files before application files if both
types require updating.
Example Boot File: SP_boot1_ver2,0,1.s19

The format of the NAV firmware file is:
SPv + version number.s19
Example NAV File: SPv1,0,0,4.s19
Figure 23: Settings for GNSS Firmware
44. Set these options:
Baud Rate:
DB9S cable: Use the highest baud rate
(i.e., 115200) unless the load fails. If the
load fails, use 57600.
USB 2.0 Device Cable: No selection is
necessary (automatic connection speed)
Target:
Select SOLARIS to upload GNSS
firmware (see Figure 23):
SP_boot1_[version number].s19
SP_boot2_[version number].s19
SPv[version number].s19
Or
Select SOLARIS PIO to upload PWRIO