NavCom SF-3050 Rev.E - Manual (Page 146)

SF-3050 Product User Guide
– Rev E
5-120
 NMEA Messages
The SF-3050 does not output NMEA messages by
default. NMEA messages must be scheduled by the
user.
 Base and Rover Navigation Setup
NavCom‟s StarUtil 3000 provides Base and Rover
setup capabilities. Refer to the StarUtil 3000 User
Guide for details. The guide is included on the
supplied SF-3050 Product Configuration USB Flash
Drive and is also available on the NavCom web site.
User Profiles
The SF-3050 utilizes commands or groups of
commands, known as User Profiles, to set the various
port assignments/parameters, navigation parameters,
and output message lists. The SF-3050 provides for
storage of up to 20 user profiles. A file with commonly
used user profiles is included on the supplied USB
flash drive.

The SF-3050 provides for storage of up to 20 user
profiles. Profiles may also be stored on a PC.
Each user profile is stored with a name. The user
profile extension is *.npt.

StarUtil 3000, or another controller solution, is
used to upload a user profile by its name.

The SF-3050 may be initially configured with the
factory default user profile or a profile customized
for the user by an authorized dealer.

Predefined, commonly used profiles are included
on the supplied SF-3050 Product Configuration
USB Flash Drive or available by email.