Orion System PT-Link II BACnet3 - Manual (Page 66)

Zone
Zone
Zone
Zone
8. FS-GUI REFERENCE GUIDE
PT-Link II BACnet3 Interface 66
3.) If the passwords match, the Authentication Window may will pop
up. You must type the User Name “Admin” and the password you just
created in the window to proceed. See Figure 44.
Figure 44: Authentication Log In
8. FieldServer Graphical User Interface
NOTE: The password must be less than 20 characters in
length. We recommend that the password be at least
8 characters in length and that
3 /
4
of the characters
should consist of the following: uppercase letters,
lower case letters, numbers, and symbols.
7.) If the user password update is successful, a message will pop up
confi rming the password update.
6.) To create or update the User password, in the Passwords Window,
select
<User> as the Account Name. You must type the Admin password
in the Current Admin Password fi eld. Then type a password in the New
Password fi eld, retype the password in the Confi rm Password fi eld and
then click
<Update Password>
. See Figure 47.
4.) After authentication takes place, the FS-GUI will return to the main
screen.
Figure 47: Changing the User Password
NOTE: To disable password protection, clear the Admin
password by simply selecting <Admin> as the
Account Name, typing in the Admin password in the
Current Admin Password fi eld and leaving the last
two fi elds blank. Then click
<Update Password>
.
See Figure 45.
Figure 45: Clear Passwords
5.) In order to return to the Passwords Window, in the Navigation Win-
dow on the left of the FS-GUI Screen, click
<Setup>
and then click
<Passwords> . See Figure 46. The Passwords Window will appear.
2.) In the Passwords Window, select
<Admin>
as the Account Name.
Then type a password in the New Password fi eld, retype the password
in the Confi rm Password fi eld and then click
<Update Password> .
See Figure 43. If you are changing the Admin password, you must
type the current password in the Current Admin Password fi eld.
Figure 43: Changing the Admin Password
NOTE:
The password must be less than 20 characters in
length. We recommend that the password be at least
8 characters in length and that
3 /
4
of the characters
should consist of the following: uppercase letters,
lower case letters, numbers, and symbols.
Figure 46: Setup - Passwords