Verilink ConnecT 56K DSU (896-502110-001) Product Manual - Manual (Page 2)

Important Notice
Before performing any operations, PLEASE
READ AND UNDERSTAND ALL
INSTRUCTIONS IN THIS MANUAL.
WHEN YOU ARE FINISHED, PUT THIS
MANUAL IN A PROMINENT LOCATION; DO
NOT THROW THIS MANUAL AWAY, unless it
is being replaced by a corrected or updated
manual.
VERILINK CORPORATION DISTRIBUTES
THIS REFERENCE “AS IS” WITHOUT
WARRANTY OF ANY KIND, EITHER
LIMITED OR IMPLIED. Verilink Corporation
reserves the right to revise this publication from
time to time without notice. Some states or
jurisdictions do not allow disclaimer of express or
implied warranties in certain transactions;
therefore, this statement may not apply to you.
Copyright
 199
3 Verilink Corporation.
All Rights Reserved.
This reference was written, illustrated, and
produced using FrameMaker

workstation
publishing software and AutoCad 12

computer
design software, Sun IPX and IPC Workstations,
Sun Sparc Laser Printers, and the ITC Helvetica
and ITC Times families of typefaces.
Your right to copy Access System 2000 and this
manual is limited by copyright law. Making copies
of this reference, or any part thereof, without prior
written authorization from Verilink Corporation is
prohibited by law and constitutes a punishable
violation of the law
The following are trademarks or registered
trademarks of their respective companies or
organizations:
AutoCad 12 / Autodesk Corporation
FrameMaker and Frame Technology / Frame
Technology Corporation
ITC Helvetica and ITC Times / International
Typeface Corporation
Panasonic is a registered trademark of Panasonic
Corporation
Access System 2000, Access Manager 2000,
Advanced Programmable Architecture, and Craft
Interface / Verilink Corporation
Sun Microsystems, Open Windows, Sparc Printer,
IPX, IPC, and Sun Workstation / Sun
Microsystems, Inc.
FrameMaker and Frame Technology / Frame
Technology Corporation
FCC Warning Statement
The Federal Communications Commission (FCC)
Rules require that you be notified of the following:
This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and
used in accordance with this reference, can cause
interference to radio communications.
This equipment has been tested and found to
comply within the limits for Class A devices
pursuant to Subpart J of Part 15 of the FCC rules,
which are designed to provide reasonable
protection against such interference when operated
in a commercial environment.
Operation of this equipment in a residential area is
likely to cause interference, in which case the
user(s) will be required to take whatever measures
(that can be) required to fix the interference at
their own expense.
Per FCC Part 68 requirements, the customer is
required to notify the Telephone Company prior to
disconnecting any CSU from the network
interface.