Verilink ConnecT 56K DSU (896-502110-001) Product Manual - Manual (Page 69)

3 = CONFIG
ConnecT 56K DS User Manual 3-39
Table 3-25 CD Options Commands
Submenu 9 TR Options
The TR OPTIONS menu is used to select the ConnecT 56K DSU
response to the data terminal ready (TR) lead.
Menu map
3=CONFIG/1=Local/2=DTE Opt./9=TR Options
Operation
Follow standard operating procedures. When 9=TR OPTIONS is
flashing: Press the Enter button resulting in the displaying of the first of
the submenu items.
1=IGNORED
2=IDLE WHEN OFF
Continue with standard operating procedures to select menu options. At
the end of the options the system will briefly display “Command
Accepted” and return to the active menu.
Table 3-26 TR Options Commands
Front Panel
AT
Command
Description
1=FORCED ON &C0 CD always ON
2=NORMAL &C1 ON only when data present on
loop
3=OFF WITH LOCD &C2 ON except 5 seconds after
disconnect in switched 56
applications
Front Panel
AT
Command
Description
1=IGNORE &D0 TR input ignored
2=IDLE WHEN OFF &D1 ON only when data present on
loop
3=OFF>ON DIAL #1 &D3 Dial stored #1:
TR goes OFF to ON
4=OFF>ON DIAL #2 &D4 Dial stored #2:
TR goes OFF to ON