Verilink ConnecT 56K DSU (896-502110-001) Product Manual - Manual (Page 23)

Configuration
ConnecT 56K DS User Manual 2-7
Configuration
The ConnecT 56K DSU contains four different user profiles (sets of
configurations options) listed in Appendix II, that are stored in read only
memory. The unit is shipped from the factory with profile 1 (default
configuration) loaded into the non-volatile configuration memory. If
profile 1 matches the desired system requirements, then no additional
configuration is required to put the unit into service. If profile 1 does not
match the desired system requirements, there are two options available.
1. Modify the default configuration.
2. Select one of the other profiles that more nearly matches the desired
configuration, modify to required specifications.
When a new profile is loaded, or the existing profile is modified, it is
stored in the non-volatile configuration memory. The ConnecT 56K DSU
is then configured with that profile every time power is turned on, or the
unit is reset.