Verilink ConnecT 56K DSU (896-502110-001) Product Manual - Manual (Page 74)

Operation
3-44 ConnecT 56K DSU User Manual
Menu map
3=CONFIG/1=Local/4=Dial Options
Operation
Follow standard operating procedures. When 4=Dial Options is flashing:
Press the Enter button resulting in the displaying of the first of the Dial
Option submenu items.
Continue with standard operating procedures to select menu options. At
the end of the options the system will briefly display “Command
Accepted” and return to the active menu.
Submenu 1 phone number
The ConnecT 56K DSU has storage for ten (10) numbers of 36 digits
each. If a phone number is to be edited, the entire number must be re-
entered. This process over writes the previously stored number.
STORE NUMBER TO
EDIT (1-10): X
Operation
Use the number key to type the number to be edited press Enter resulting
in the number being displayed for editing. Typing numbers will begin a
new entry from left to right.
Submenu 2 auto answer
The Auto Answer option is used to specify whether incoming calls are to
be automatically answered by the ConnecT 56K DSU or manually by the
user.
Table 3-32 Auto Answer Commands
Front Panel
AT
Command
Description
1=DISABLED _J0 Auto Answer disabled
2=ENABLED _J1 Auto Answer enabled