C management information base (mib) reference, Introduction, Interface numbering – Verilink PRISM 3030 (34-00208.L) Product Manual User Manual
Page 105: Management information base, Mib) reference, Mib) r, Anagement, Nformation, Eference
C
M
ANAGEMENT
I
NFORMATION
B
ASE
(MIB) R
EFERENCE
Introduction
The Verilink 3030 has an optional Ethernet /Token Ring card which provides
connectivity for LAN-based management stations. The embedded TCP/IP Protocol
Stack allows remote access from both private networks and the Internet.
The Telnet agent provides remote VT100-terminal-emulation capability to access
the PRISM 3030 user interface for configuration and control.
Management and monitoring of the unit is provided by an embedded SNMP agent
conforming to RFC 1213 (for MIB-II) and RFC 1406 (for DS1).
This appendix describes in detail how the embedded SNMP agent conforms to the
RFCs.
Interface
Numbering
The interfaces for the 3030 are indexed in the following order: Ethernet or Token
Ring, T1 NET, T1 DTE, slots 2 through 6 for data, and slots 2 through 6 for voice.
For example, a 3030 with an Ethernet card in Slot 1, a 2-Wire FXS in Slot 2 and a
Dual V.35 in Slot 3 is indexed as follows.
1
Ethernet
2
T1 NET
3
V.35 Data Port 3A
4
V.35 Data Port 3B
5
2-Wire FXS Port 2A
6
2-Wire FXS Port 2B
7
2-Wire FXS Port 2C
8
2-Wire FXS Port 2D
9
2-Wire FXS Port 2E
10 2-Wire FXS Port 2F