Verilink PRISM 3030 (34-00208.L) Product Manual - Manual (Page 111)

RFC 1213 101
ifLastChange { ifEntry 9 } read-only “The value of sysUpTime
at the time the interface
entered its current
operational state. If the
current state was entered
prior to the last
re-initialization of the local
network management
subsystem, then this object
contains a zero value.” Returns the time in hundredths of a
second when the interface was
changed or reset.
ifSpecific { ifEntry 22 } read-only “A reference to MIB
definitions specific to the
particular media being used
to realize the interface. For
example, if the interface is
realized by an ethernet,
then the value of this object
refers to a document
defining objects specific to
ethernet. If thisinformation
is not present, its value
should be set to the
OBJECT IDENTIFIER { 0
0 }, which is a syntatically
valid object identifier, and
any conformant
implementation of ASN.1
and BER must be able to
generate and recognize this
value. T1 Network Interface
{ 1.3.6.1.2.1.10.18 }
(ds1)
All others { 0.0 }
Table C-2
Object Name Object ID User Access Object Description Get Set