Verilink PRISM 3030 (34-00208.L) Product Manual - Manual (Page 109)

RFC 1213 99
ifTable OID
{ 1.3.6.1.2.1.2 }
Table C-2
Object Name Object ID User Access Object Description Get Set
ifNumber { interfaces 1 } read-only “The number of network
interfaces (regardless of
their current state) present
on this system.” Returns the number of interfaces
present on the accessed unit.
ifIndex { ifEntry 1 } read-only “A unique value for each
interface. Its value ranges
between 1 and the value of
ifNumber. The value for
each interface must remain
constant at least from one
re-initialization of the
entity's network
management system to the
next re-initialization.” Returns the indexed values of the
unit’s interfaces. Refer to Introduction
on page 95 for instructions on how
interfaces may be accessed.
ifDescr { ifEntry 2 } read-only “A textual string containing
information about the
interface. This string should
include the name of the
manufacturer, the product
name and the version of the
hardware interface.” Returns one of the following textual
descriptions:
Ethernet - returned for the E/TR, for
Ethernet interface.
Token Ring - returned for the E/TR,
for Token Ring.
T1 Network Interface - returned for
the DS1 interface.
V.35 Data Port xy - returned for slot
x, port y (if a V.35 interface).
530 Data Port xy - returned for slot x,
port y (if an EIA-530 interface).
RS232 Data Port xy - returned for slot
x, port y (if an RS-232 interface).
DSX Data Port xy - returned for slot
x, port y (if a DSX Data Port)
2Wire FXS Port xy - returned for slot
x, port y (if a 2-Wire FXS interface).
2Wire FX0 Port xy - returned for slot
x, port y (if a 2-Wire FX0 interface).
4 Wire E&M Port xy - returned for
slot x, port y (if a 4 -Wire E&M
interface).
DSU Data Port x-yz - x for slot, y for
DSU, z for port (if a DSU MP
interface).
T1 D/I Port - returned for the T1
DTE interface on DSUs.
ifType { ifEntry 3 } read-only “The type of interface,
distinguished according to
the physical/link protocol(s)
immediately ‘below’ the
network layer in the
protocol stack.” Returns one of the following integer
values:
other (1) - returned for voice
interfaces.
ethernet-csmacd(6) - returned for
Ethernet.
iso88025-tokenRing(9) - returned for
Token Ring.
ds1(18) - returned for the T1 Network
and DTE interface.
propPointToPointSerial(22) - returned
for V.25, EIA-530, and RS-232 data
ports.