Wire e&m, Ethernetinterface, Fxo 4-wire e&m – Verilink PRISM 3030 (34-00208.L) Product Manual User Manual
Page 14: Ethernet interface
4
C
HAPTER
1: G
ENERAL
Encoding:
PCM six ports per application module
Power/Ring:
Internal
Transmit Gain:
−
4.0 dB fixed
Receive Gain:
−
11 dB to 0 dB
FXO
Applications:
FXO (Foreign Exchange Office), Extends PBX Service providing
remote users with Off Premises Extension (OPX), Universal Voice
Grade (UVG; Requires Verilink equipment at each end.),
Direct Inward Dialing (DID), Dialed Number Identification Service
(DNIS), Automatic Number Identification (ANI), and Custom Local
Area Signalling Service (CLASS)
Connector:
AMP 50 -pin (25 pairs), female
Signalling:
Loop, Ground
Encoding:
PCM six ports per application module
Power/Ring:
Internal
Transmit Gain:
−
6 dB to 0 dB
Receive Gain:
−
6 dB to 0 dB
4-Wire E&M
Applications:
4-Wire E&M Tie Trunks, PBX - Point to Network,
PBX - Point to Point, TO (transmission only)
Connector:
AMP 50 -pin (25 pairs), female
Signalling:
Type I, II, III, TO (p/n F-3010-200--112)
Type I, II, III, IV, V, TO (p/n F-3010-200--114)
Encoding:
PCM six ports per application module
Power/Signalling:
Internal
−
48 VDC
Transmit Gain:
−
14 dB to +2 dB
Receive Gain:
−
18 dB to
−
1 dB
Ethernet Interface
Network Protocol:
TCP /IP-based networks
Data Rate:
10 Mbps
Connection:
RJ-45 (compliant with IEEE 802.3 Ethernet standards)
Compatibility:
10BASE-2, 10BASE-5, and 10BASE -T
Standards:
ISO / IEC 8802.3 (Ethernet)
MIB-II:
Device identification and interface performance data. All
applicable objects and reporting traps maintained.
DS1 MIB:
DS1 network interface configuration, performance objects,
and alarm reporting traps are maintained.