Verilink PRISM 3030 (34-00208.L) Product Manual - Manual (Page 112)

102 A PPENDIX C: M ANAGEMENT I NFORMATION B ASE (MIB) R EFERENCE
RFC 1406 -
DS1/E1 MIB This RFC was published in January 1993 and supersedes RFC 1232. RFC 1406 is
used to manage DS1 interfaces, and in this case, a T1 interface. The following lists
the objects contained within this RFC and how the unit responds to them.
dsx1ConfigTable
OID
{ 1.3.6.1.2.1.10.18.6 }
Table C-3
Object Name Object ID User Access Object Description Get Set
dsx1LineIndex { dsx1Config
Entry 1 } read-only “This object is the
identifier of a DS1
Interface on a managed
device. If there is an
ifEntry that is directly
associated with this and
only this DS1 interface,
it should have the same
value as ifIndex.
Otherwise, the value
exceeds ifNumber, and is
a unique identifier
following this rule:
inside interfaces (e.g.,
equipment side) with
even numbers and
outside interfaces (e.g.,
network side) with odd
numbers.” Returns the ifIndex of the
specified DS1 interface.
dsx1IfIndex { dsx1Config
Entry 2 } read-only “This value for this
object is equal to the
value of ifIndex from the
Interfaces table of MIB
II (RFC 1213).” Returns the ifIndex of the
specified DS1 interface.