Read community, Write community, System contact – Verilink PRISM 3030 (34-00208.L) Product Manual User Manual
Page 80: Read community write community system contact
70
C
HAPTER
4: T
ERMINAL
O
PERATION
When an alarm group is defined to report via SNMP, up to six Trap IP addresses
can be assigned. The unit reports each alarm by transmitting an SNMP Trap to
each Trap IP address. T1 network problems often cause more than one alarm type.
In these cases, multiple trap messages are generated, each with a different specific
trap type. The specific -trap field of each trap message is set to one of the values
shown in Table 4-4.
The following five menu items require the entry of up to 255 characters identifying
the appropriate group, person, device function, or unit location.
Read Community
Accepts a character string identifying the group authorized to perform read
operations. The default setting is public.
Write Community
Accepts a character string identifying the group authorized to perform write
operations. The default setting is private.
System Contact
Accepts a character string identifying the person responsible for a network device.
The default setting is no system contact.
Table 4-4 Trap Definitions
Cleared
Near
Cleared
Far
Alarmed
Near
Alarmed
Far
Description
4
54
104
154
DTE CRCES
5
55
105
155
DTE BPVS
6
56
106
156
DTE AISS
7
57
107
157
DTE RAS
8
58
108
158
DTE UAS
9
59
109
159
DTE OOFS
10
60
110
160
DTE LOSS
11
61
111
161
DTE CSS
12
62
112
162
DTE SES
13
63
113
163
DTE ES
14
64
114
164
NET CRCES
15
65
115
165
NET BPVS
16
66
116
166
NET AISS
17
67
117
167
NET RAS
18
68
118
168
NET UAS
19
69
119
169
NET OOFS
20
70
120
170
NET LOSS
21
71
121
171
NET CSS
22
72
122
172
NET SES
23
73
123
173
NET ES
24
74
124
174
Device Reset