Verilink PRISM 3030 (34-00208.L) Product Manual - Manual (Page 81)

Configuration Screens 71
System Name
Accepts a character string identifying the functionality of the network device. The
default setting is no system name.
System Location
Accepts a character string identifying the physical location of network device. The
default setting is no system location.
Voice
Parameters
The Voice Port Configuration screen (Figure 4-14) allows the assignment of voice
DS0s to network channels. Only the voice ports with the Mode parameter set to
Active are connected to the selected network channel. Each voice port option
module has six voice circuits, which are independently assignable to a selected
network channel. For a detailed description of the voice port operation, refer to
Appendix B.
Slot
Displays the voice parameters for a particular slot and allows selecting another
applicable slot.
Card Type
Various types of voice port modules are available with the following default
parameters (see Voice Port Configuration on page 32).
Port
Displays the ports available for the selected slot.
Figure 4-14 Voice Port Configuration Screen
3030 DSU x.xx/x.xx PRISM 3030 Date: MM/DD/YY
3030 DSU x.xx/x.xx (Unit Address: 23) Time: HH:MM:SS
------------------------- PRISM Voice Port Configuration -----------------------
Element: (NEAR)
Slot: (3)
Card Type: FXS
Delay Tx Gn Rx Gn
Port DS0 Mode State Name/ID Sig. Secs. dB dB
-------------------------------------------------------------------------------
A (13) [ACTIVE] BUSY (DS0 13 ) [FXS/LS ] [-4.0] [ -6]
B (14) [ACTIVE] BUSY (DS0 14 ) [FXS/GS ] [-4.0] [ -6]
C (15) [ACTIVE] BUSY ( ) [MEG/LS ] [ 0] [ -6]
D (16) [ACTIVE] BUSY ( ) [MEG/GS ] [ 0] [ -6]
E (17) [ACTIVE] BUSY ( ) [PLAR ] [ 0] [ -6]
F (18) [SPARE ] IDLE ( ) [FXS/LS ] [-4.0] [ -6]
222222 2+2+2+ 333333 11111+
Channel Allocation: AAAAAA BXBXBX ABCDEF *****R
Firmware Revision: x.xx
------------------------------------Messages------------------------------------
Local Screen