Verilink WANsuite 7205 (34-00317.B) Product Manual - Manual (Page 105)

W e b S e r v e r I n t e r f a c e 3-75
Default Translation Forces translation on a specific IP port regardless of the source IP Address. If
Default Translation is set to “Enable,” the packet will never be discarded, but
will always pass through the translation path. Therefore, any packets with a
destination address different from the global/Internet network address will be
processed by the IP Gateway, and may be routed to another port. If this
parameter is set to “Disable,” no packet with a destination address different
from the global/Internet address will be processed. Setting this parameter to
“Disable” will override an “Enable” parameter set under “Filter Non Local
Address” on the NAT Details menu.
Type Defines whether this port is local or global. Default is LAN global. All others
are local.
IP Address IP Address of this port. Default is the value defined in the IP Gateway Circuit
Table.
Mask Mask related to the defined IP Address. Default is the value defined in the IP
Gateway Circuit Table.
The NAT Ports screen provides the following user-activated buttons:
Figure 3.66 NAT Port Details Screen
The NAT Port Details screen provides the following user-activated buttons:
Button Function
NAT Details Returns the user to the previous screen.
Add New Lets the user add additional addresses.
Refresh Refreshes data on the current page.
Button Function
Submit Sets any values that have been changed.
NAT Details Returns the user to the previous screen.
NAT Port Table Lets the user add additional addresses.
Delete NAT Port Deletes the specified NAT Port.