Verilink WANsuite 7205 (34-00317.B) Product Manual - Manual (Page 22)

1-8 W A N s u i t e 7 2 0 5
(Verilink recommends Microsoft Internet Explorer 5.0 or higher) that
decreases installation and configuration time for service employees,
simplifies troubleshooting and fault isolation of network problems, and
optimizes management of both TDM and frame-based services.
• VT100 or TELNET
• Local Supervisory port
• Ethernet port for management or IP routing
• Frame Relay Aware:
• Support for leased-line and frame relay services
• Layer 2 end-to-end visibility and control
• Embedded frame relay test set
• Layer 3 support for visibility beyond the network layer (up to 25
protocols)
• “Top Talker” reports
−
lets you find out who’s generating the most IP
traffic on your LAN
Front Panel
The front panel of the WANsuite 7205 application module (Figure 1.1)
provides the following:
• Six LED status indicators
• A local RJ-11 Supervisory port
• Three sets of Bantam jacks for diagnostics
•
Ejector handles for installing the module in a shelf slot
Figure 1.1 Front Panel of WANsuite 7205