Verilink WANsuite 7205 (34-00317.B) Product Manual - Manual (Page 128)

4-6 W A N s u i t e 7 2 0 5
Figure 4.5 Confirmation Screen
Interfaces Screen
The Interfaces screen displays a list of all the unit’s available interfaces as
shown in Figure 4.6.
Figure 4.6 Interfaces Screen
From the Interfaces screen, you may choose from the following: Network 1,
Network 2, Network 3, Serial 1, Serial 2, Ethernet, or Supervisory.
Network Config Screens
The Network 1, Network 2 (shown below in Figure 4.7), and Network 3
Config screens offer the same parameters except for the following: the
“Function” parameter is found only on the Network 2 Config screen, and the
“Timing” parameter is not included on the Network 3 Config screen. The
Network Config screens let you view and make changes to the Network
interface's configuration as described below. In addition, these screens provide
a table that displays the alarm values for the Network interface.