Verilink WANsuite 7205 (34-00317.B) Product Manual - Manual (Page 87)

W e b S e r v e r I n t e r f a c e 3-57
OSPF Router ID This 32-bit number assigned to each router running the OSPF protocol
uniquely identifies the router within an Autonomous System. Each router
requires a unique router ID. Default is the LAN IP address of the unit.
The IP Gateway screen provides the following user-activated buttons:
Circuits Screen
Access this menu by clicking on the “Circuit Table” button at the bottom of the
IP Gateway menu. This screen shows the configured circuit. To configure a new
circuit, click on “Add New.”
Figure 3.45 Circuits Screen
Circuit Details Screen
Access this menu by selecting “Circuit Details” from the preceding menu. This
screen is used to establish the configuration parameters of a given circuit. To
establish a new circuit or to change the parameters of an existing circuit, enter
the desired values in the parameter fields and press the “Submit” button.
Button Function
RIP Parameters
Static Routes Table Displays static routes and dynamic routes information.
Static ARP Table Displays static ARP information.
Trusted Neighbors Displays trusted neighbors information.
OSPF Parameters
Area Table Displays area information.
Virtual Link Table Displays virtual link information.
Submit Submits to the unit information specific to IP Gateway.
Circuit Table Lets you access circuit-related information/operation.
Refresh Refreshes data on the current page.