Verilink WANsuite 7205 (34-00317.B) Product Manual - Manual (Page 133)

V T 1 0 0 I n t e r f a c e 4-11
Figure 4.9 Performance 30 Day Screen
Serial Screens
NOTICE: All references in this manual to the Serial 1 and Serial 2 interfaces
correspond directly to the WANsuite 7205’s Data 1 and Data 2 ports,
respectively.
The Serial screens let you view and make changes to the unit’s Serial
interface configuration as described in the paragraphs below. The parameters
on the Serial 1 and Serial 2 screens are the same, except for the “Invert
Clock” parameter, which is shown only on the Serial 2 screen (Figure 4.10).
To make changes to any Serial parameter, simply set the parameter to the
desired selection and press the “Esc” key.
Figure 4.10 Serial Screen