Verilink WANsuite 7205 (34-00317.B) Product Manual - Manual (Page 177)

V T 1 0 0 I n t e r f a c e 4-55
Figure 4.46 Circuit Table Screen
Circuit Details Screen
Access this menu by selecting “Circuit Details” from the preceding menu. This
screen is used to establish the configuration parameters of a given circuit. The
screen’s parameters are described in the paragraphs below.
Figure 4.47 Circuit Details Screen
Endpoint Endpoint name. By default, the first circuit is always the LAN circuit. All
other circuits are associated with Endpoint names as defined in the Endpoint
Name Table in the Main menu (See Applications -> Endpoint Table).
IP Address IP Address of the circuit.
IP Mask IP mask of the circuit.
Max Transmit Unit Maximum transmit unit this circuit will send at any one time.