Wavetronix Command Collector (CMD-DCx) - User Guide - Manual (Page 47)

46 CHAPTER 4 • SENSOR TOOLBAR
Data
The Data button opens the Data page and transfers the current selection of sensors to the
Reports tab for convenience.
All sensors are listed in the Select Sensors box on the left side of the screen (see Figure 4.17).
Sensors that were selected on the Sensors page are also shown selected here. You can select
additional sensors from the tree, if needed, and you can sort the tree according to the values
in the Show Sensors By field (IP/Port, Location/Description, and Custom ID).
Figure 4.17 – Reports Tab of Data Page
See Chapter 5 for more information about defining, creating and viewing reports.
Search
The Search button opens the Search window (see Figure 4.18).