Westermo MRD-3x0 - Manual (Page 10)

10 6623-3201
1.1.5 Checking the Status of the Connection
To check the status of the connection select Status from the
top level menu and then select Wireless from the second level
menu. The Wireless status page will be displayed which will
look similar to that shown in Figure 8. The status of the con-
nection will change as the unit connects to the network, first
it will report Checking then Connecting and finally Connected. To
see the value changing the page will need to reload.
Figure 8: Wireless Status page.
Note: If the status is reported as Error then check that the
profile settings have been entered correctly as shown in
Section 3.2.1
Once connected the Status Alarms page should have no faults
listed as shown in Figure 9