Westermo MRD-3x0 - Manual (Page 4)

4 6623-3201
1 Basic Configuration
The three sections below detail the steps needed to config-
ure the MRD-3xx for basic packet mode functionality. For
details on configuring the unit for Circuit Switched mode
and for more advanced configuration refer to the Advanced
Configuration section.
1.1 Configure the 3G Wireless interface
To access the configuration page for the 3G Wireless inter-
face, click on Wireless. The Basic Wireless configuration page
will be displayed as shown in Figure 1.
Figure 1: Wireless Interface Basic configuration.