Westermo MRD-3x0 - Manual (Page 131)

131 6623-3201
Figure 95: IPsec tunnel configuration.
To configure the tunnel as describe the following parameters
are entered:
Label: Test
Enabled: On (Checked)
Local interface: WLS
Local nexthop: Auto
Remote host: 123.123.123.123
Operating mode: Tunnel
Initiate tunnel: On (Checked)
Init rekeying, margin (mins) & fuzz:
Init rekeying: On (Checked)
Margin: 10 Minutes
Fuzz: 100%
Dead peer detection delay & timeout (sec):
Delay: 0
Timeout: 0