2 selecting the port function – Westermo MRD-3x0 User Manual
Page 184
Advertising
184
6623-3201
7.8.2 Selecting the port function
The serial server configuration is accessed by selecting Serial
Server from the main menu and Port Setup from the submenu.
To enable a port for the Telnet Server function, select Telnet
(RFC 2217) Server from the Function column of the appropri-
ate port. Once selected, click Update to confirm the change.
Once confirmed, the port will display as shown in Figure 129.
Figure 129: Selecting Telnet Server function
Advertising