Westermo MRD-3x0 - Manual (Page 97)

97 6623-3201
5.6.3 Adding a new custom NAT
From the main port forwards page click the Add new custom
NAT button. This will select the Add new custom NAT page.
An example of adding a new custom NAT is shown in Figure
77. In this example, a new custom NAT is created which will
source NAT packets outgoing on the SSL VPN interface to the
IP address of the SSL VPN.
Figure 77: Adding a custom NAT.
It can be seen in the example that in the centre column only
Outgoing interface is checked. This indicates these are the
matching criteria that will be applied to packets. In this case,
all packets outgoing on the SSL VPN will be source NAT'd.