Westermo MRD-3x0 - Manual (Page 5)

5 6623-3201
1.1.1 Network Configuration
The Network Configuration section contains the settings for
the operational mode and the frequency band of the unit, the
default settings will usually be adequate to connect the unit to
a packet based network.
1.1.2 Setting the SIM card PIN
The SIM card may have a PIN associated with it and may
require the PIN to be entered before the unit can access the
SIM. To set the SIM PIN click Setup. A dialog box as shown in
Figure 2 will be displayed.
Figure 2: SIM PIN control dialog.
Set the field marked Enter when requested to Yes and enter the
PIN in the New PIN and Confirm PIN entry boxes. Then click
the Set button to save the PIN.
Figure 3: SIM PIN control dialog.
Set to "Yes"
Enter PIN in both
text boxes
Click "Set"
to complete