Westermo MRD-3x0 - Manual (Page 100)

100 6623-3201
5.6.4 Editing a Custom NAT
A custom NAT can be edited by clicking the pencil icon in
the Edit column of the filter to be changed. Once clicked, the
details of the custom NAT will be displayed in the same table
as when creating a new custom NAT.
As an example, to edit the second custom NAT in the
Custom NAT table shown in Figure 80, click the pencil icon in
the second row of the table. A page similar to the new cus-
tom NAT page will be displayed but with the details of custom
NAT 2. To set the protocol for the custom NAT to be UDP,
changes were made as shown in Figure 81.
Figure 81: Editing a custom NAT.