Westermo MRD-3x0 - Manual (Page 14)

14 6623-3201
1.3 Configure clients to use the MRD-3xx
The MRD-3xx will act as a gateway for connections destined
over the wireless interface. The default configuration will pro-
vide Network Address Translation and firewalling to protect
clients on the local network.
To configure clients to use the MRD-3xx as their gateway:
If the clients have a DHCP address allocated by the •
MRD-3xx, they will have learned the necessary set-
tings. No further configuration is needed.
If clients have static IP addresses, set their default
•
route and DNS server to the IP address of the
MRD-3xx.