4 raw udp – Westermo MRD-3x0 User Manual
Page 166
Advertising
166
6623-3201
7.4 Raw UDP
7.4.1 Description
This function is similar to Raw TCP Client/Server mode, but
uses UDP as the network transport. UDP has lower over-
heads than TCP, but as UDP offers no lost packet detection,
this function should only be used with serial protocols than
can provide the necessary error correction.
7.4.2 Selecting the port function
The serial server configuration is accessed by selecting Serial
Server from the main menu and Port Setup from the submenu.
To enable a port for Raw UDP function, select Raw UDP from
the Function column of the appropriate port. Once selected,
click Update to confirm the change. Once confirmed, the port
will display as shown in Figure 121.
Figure 121: Selecting Raw UDP function
Advertising