Westermo MRD-3x0 - Manual (Page 18)

18 6623-3201
2.3 Configuration Backup & Restore
The configuration of the MRD-3xx can be saved as a file to a
PC. This file can then be used to restore the configuration of
the unit at some later time or used to configure multiple units
with the same configuration. To access the configuration back-
up restore options select Backup & Upgrade from the System
sub-menu. The Backup & Upgrade page will be displayed as
shown in Figure 14.
Figure 14: Backup and Upgrade page.
To save the current configuration click on the link in the sec-
tion titled Backup current configuration. A pop-up box similar to
that shown in Figure 15 will be displayed, select Save to Disk
and click OK and select a suitable location to save the file.
Figure 15: Save configuration.