Westermo MRD-3x0 - Manual (Page 162)

162 6623-3201
7.3 Raw TCP Client/Server
7.3.1 Description
The serial server will create a transparent pipe between the
serial port and a TCP network connection. Example uses of
this mode include connecting to a remote PC running serial
port redirector software with virtual COM ports or connect-
ing two units back-to-back to create a serial bridge.
7.3.2 Selecting the port function
The serial server configuration is accessed by selecting Serial
Server from the main menu and Port Setup from the submenu.
To enable a port for Raw TCP Client/Server function, select
Raw TCP Client/Server from the Function column of the appro-
priate port. Once selected, click Update to confirm the change.
Once confirmed, the port will display as shown in Figure 119.
Figure 119: Selecting Raw TCP Client/Server function