H3C Technologies H3C S6800 Series Switches - Manual (Page 24)

11
Task Command
Display LSP information.
display mpls lsp [ egress | in-label label-value | ingress |
outgoing-interface interface-type interface-number | protocol { bgp
| ldp | local | rsvp-te | static | static-cr } | transit ] [ vpn-instance
vpn-instance-name ] [ ipv4-dest mask-length | ipv6 [ ipv6-dest
prefix-length ] ] [ verbose ]
Display MPLS Nexthop Information Base
(NIB) information.
display mpls nib [ nib-id ]
Display usage information about NIDs. display mpls nid [ nid-value1 [ to nid-value2 ] ]
Display LSP statistics. display mpls lsp statistics
Display MPLS summary information. display mpls summary
Display ILM entries. display mpls forwarding ilm [ label ] [ slot slot-number ]
Display NHLFE entries. display mpls forwarding nhlfe [ nid ] [ slot slot-number ]
Clear MPLS forwarding statistics for the
specified LSPs.
reset mpls statistics { all | [ vpn-instance vpn-instance-name ] { ipv4
ipv4-destination mask-length | ipv6 ipv6-destination prefix-length }
| static | te ingress-lsr-id tunnel-id }