H3C Technologies H3C S6800 Series Switches User Manual

Page 244

Advertising
background image

231

# Configure interface VLAN-interface 12, and enable MPLS on it.

[ASBR-PE1] interface vlan-interface 12

[ASBR-PE1-Vlan-interface12] ip address 11.0.0.2 255.0.0.0

[ASBR-PE1-Vlan-interface12] mpls enable

[ASBR-PE1-Vlan-interface12] quit

# Configure interface Loopback 0, and enable IS-IS on it.

[ASBR-PE1] interface loopback 0

[ASBR-PE1-LoopBack0] ip address 3.3.3.9 32

[ASBR-PE1-LoopBack0] isis enable 1

[ASBR-PE1-LoopBack0] quit

# Create routing policies.

[ASBR-PE1] route-policy policy1 permit node 1

[ASBR-PE1-route-policy-policy1-1] apply mpls-label

[ASBR-PE1-route-policy-policy1-1] quit

[ASBR-PE1] route-policy policy2 permit node 1

[ASBR-PE1-route-policy-policy2-1] if-match mpls-label

[ASBR-PE1-route-policy-policy2-1] apply mpls-label

[ASBR-PE1-route-policy-policy2-1] quit

# Enable BGP on ASBR-PE 1, and apply the routing policy policy2 to routes advertised to IBGP

peer 2.2.2.9.

[ASBR-PE1] bgp 100

[ASBR-PE1-bgp] peer 2.2.2.9 as-number 100

[ASBR-PE1-bgp] peer 2.2.2.9 connect-interface loopback 0

[ASBR-PE1-bgp] address-family ipv4 unicast

[ASBR-PE1-bgp-ipv4] peer 2.2.2.9 enable

[ASBR-PE1-bgp-ipv4] peer 2.2.2.9 route-policy policy2 export

# Enable the capability to advertise labeled routes to IBGP peer 2.2.2.9 and to receive labeled

routes from the peer.

[ASBR-PE1-bgp-ipv4] peer 2.2.2.9 label-route-capability

# Redistribute routes from IS-IS process 1 to BGP.

[ASBR-PE1-bgp-ipv4] import-route isis 1

[ASBR-PE1-bgp-ipv4] quit

# Apply the routing policy policy1 to routes advertised to EBGP peer 11.0.0.1.

[ASBR-PE1-bgp] peer 11.0.0.1 as-number 600

[ASBR-PE1-bgp] address-family ipv4 unicast

[ASBR-PE1-bgp-ipv4] peer 11.0.0.1 enable

[ASBR-PE1-bgp-ipv4] peer 11.0.0.1 route-policy policy1 export

# Enable the capability to advertise labeled routes to EBGP peer 11.0.0.1 and to receive labeled
routes from the peer.

[ASBR-PE1-bgp-ipv4] peer 11.0.0.1 label-route-capability

[ASBR-PE1-bgp-ipv4] quit

[ASBR-PE1-bgp] quit

4.

Configure ASBR-PE 2:
# Enable IS-IS on ASBR-PE 2.

<ASBR-PE2> system-view

[ASBR-PE2] isis 1

[ASBR-PE2-isis-1] network-entity 10.222.222.222.222.00

Advertising