HEIDENHAIN ND 1300 OED and Crosshair Systems - Manual (Page 105)

87
6
Measuring
Line constructed from a line and an angle
The line will be constructed and rotated counterclockwise the amount
equal to the parent angle.
To construct a line from a line and an angle:
1 Touch the Measure Line icon
2 Touch the line feature
3 Press the Enter key
4 Touch the angle feature
5 Press the Enter key
6 Press the Finish key
The rotated line will be constructed.
Lines constructed from a line and a rectangle
Two line constructions can be made from a line and a slot:
• Perpendicular line:
The line from the center of the slot, to the line, perpendicular to the line
• Parallel line:
The line through the center of the slot, parallel to the line
To construct a line from a line and a
slot:
1 Touch the Measure Line icon
2 Touch the line feature
3 Press the Enter key
4 Touch the slot feature
5 Press the Enter key
6 Press the Finish key
The perpendicular line will be constructed. The alternative parallel line construction can be selected from
the drop-down menu in the DRO window.
Constructing Features