HEIDENHAIN ND 1300 OED and Crosshair Systems - Manual (Page 145)

127
7
Tolerancing
Applying tolerances to features
Tolerances are applied to feature measurements using tolerance screens. The method of applying toler-
ances to features is diagrammed below and is nearly identical for all tolerance types.
In the following example, a true position tolerance is applied to a circle feature.
Selecting a feature
Touch the desired feature in the feature list to select it.
Displaying the tolerance screen
Touch the Tol screen button to
display the tolerance screen.
Selecting a tolerance type
Touch the desired tolerance type
button to select a tolerance type.
In this example, the position tol-
erance type is selected.
Applying Tolerances to Features