HEIDENHAIN ND 1300 OED and Crosshair Systems - Manual (Page 109)

91
6
Measuring
Line constructed from a slot
The line feature will be constructed from the arc center at one end of the
slot to the arc center at the other end.
To construct a line from a slot:
1 Touch the Measure Line icon
2 Touch the slot feature
3 Press the Enter key
4 Press the Finish key
The extracted line of the slot will be constructed.
Line constructed from two slots
The line feature will be constructed from the center of one slot to the
center of the other.
To construct a line from two slots:
1 Touch the Measure Line icon
2 Touch the first slot feature
3 Press the Enter key
4 Touch the second slot feature
5 Press the Enter key
6 Press the Finish key
The line will be constructed between the two slots.
Constructing Features