HEIDENHAIN ND 1300 OED and Crosshair Systems - Manual (Page 218)

200 QC-300 Series User’s Guide
performed along the part’s X-axis, when part following is enabled, subsequent X-axis motion will follow
the part skew, not the machine coordinate’s X-axis. When the user touches the Part following function,
part following is toggled on or off.
Stop motion
The Stop motion function is included in the Extra tab of systems with the
CNC option to stop all stage motion. When the user touches the Stop mo-
tion function, motion is toggled on or off.
Goto feature
The Goto feature function is included in the Extra tab of systems with the CNC option. When the
user touches the Goto function, the stage is moved to position the probe over the feature currently
selected in the feature list.
Motion
stopped
Motion
enabled