Yaskawa E7B Drive Bypass - Manual (Page 301)

Index - 7
Parameters .................................................... A-19, A-22
Pre-Alarm...................................................... 6-11, A-22
Overload
Alarms/Faults .....................................................6-7, 6-8
And Auto Restart..................................................... 5-70
Capacity.....................................................................C-4
Drive.................................................................5-50, 6-7
Motor.....................................................6-7, A-15, A-19
Protection ....................................................... A-19, C-4
Relay .........................................................1-13, 2-2, 2-3
Overtorque - See Torque Detection...................... 5-71, A-21
Overvoltage Protection......................................6-6, 6-9, C-4
And Auto Restart..................................................... 5-70
DC Bus - See DC Bus Voltage.................6-8, 6-12, C-4
P
Parameters
Accel/Decel (C1-01 - C1-11) ................................... A-7
Analog Inputs (H3-02 - H3-13).............................. A-16
Analog Outputs (H4-01 - H4-08)................. A-17, A-18
Auto-Tuning (T1-02 - T1-04) ................................ A-25
Capacity Related .......................................................B-1
Carrier Freq (C6-02 - C6-05) ................................... A-8
Com OPT Setup (F6-01 - F6-05) ............................A-11
COPY Function (o3-01 - o3-02) ............................ A-25
DC Braking (b2-01 - b2-09)..................................... A-4
Delay timers (b4-01 - b4-02).................................... A-5
Digital Inputs (H1-01 - H1-05) ................. A-12 to A-14
Digital Outputs (H2-01 - H2-02)............................ A-15
Energy Saving (b8-01 - b8-06) ................................ A-7
Example of Changing.....................................3-16, 3-17
Factory Reset (Initialize).......................................... A-2
Fault Restart (L5-01 - L5-03)................................. A-21
Hdwe Protection (L8-01 - L8-19) .......................... A-22
High Slip (n3-01 - n3-04)....................................... A-23
Hunting Prevention (n1-01 - n1-02)....................... A-23
Initialization (A1-00 - A1-05).................................. A-2
Jump Frequencies (d3-01 - d3-04) ........................... A-9
Key Selections (o2-01 - o2-15) .................... A-24, A-25
Listing of .....................A-1 to A-29, Inside Front Cover
Modified...........................................................3-8, 3-15
Monitor Select (o1-01 - o1-08) .................... A-23, A-24
MOP/Trim Control (d4-01 - d4-02) ......................... A-9
Motor Overload (L1-01 - L1-05) ........................... A-19
Motor Setup (E2-01 - E2-05) ..................................A-11
PI Control (b5-01 - b5-30) ............................... A-5, A-6
Preset Reference (Speeds) (d1-01 - d1-17) .............. A-8
Programming (Basic) ....................................5-1 to 5-85
PwrLoss Ridethru (L2-01 - L2-05) ........................ A-19
Ref Detection (L4-01 - L4-06)............................... A-21
Reference Limits (d2-01 - d2-03) ............................ A-9
S-Curve Acc/Dec (C2-01 - C2-02) .......................... A-7
Sequence (b1-01 - b1-12)......................................... A-4
Serial Com Setup (H5-01 - H5-09) ........................ A-18
Setting and Reading...................................... 3-8 to 3-17
Speed Search (b3-01 - b3-14)...................................A-5
Stall Prevention (L3-01 - L3-06) ............................A-20
Torque Comp (C4-01 - C4-02) .................................A-8
Torque Detection (L6-01 - L6-03)..........................A-21
Troubleshooting.......................................................6-14
User (A2-01 - A2-32) .......................................A-2, A-3
V/f Pattern (E1-01 - E1-13) ....................................A-10
Parity - See Modbus Communications ............................D-2
Parts
Ordering Replacement...............F-1, Inside Back Cover
Password
Setting..............................................................5-11, A-2
Troubleshooting.......................................................6-16
PCB
Bypass Operator Interface (A3).......1-13, 1-14, 7-2, F-4
Bypass Relay Controller (A2) ..1-13, 1-14, 7-2, F-4
Drive Control......................................................7-2
Drive Gate Drive .......................................................7-2
Drive Power...............................................................7-2
Drive Terminal................................................... 7-2, 7-8
Peripheral Devices
AC and DC reactor ................................................... E-2
Magnetic Contactor .................................................. E-2
Noise filter ................................................................ E-2
Troubleshooting.......................................................6-19
Phase Loss Detection
Input.................................................................6-8, A-22
Phase-to-Phase Short ......................................... 6-7, 6-8
Physical Installation -See Installation, Physical ...............1-1
PI Function
Accel/Decel Time ............................................5-33, A-6
Block Diagram.........................................................5-22
Feedback.............................5-22 to 5-32, 6-6, 6-11, A-6
Differential .............................................5-61, A-16
Loss Detection Level................................5-32, A-6
Loss Detection Time.................................5-32, A-6
Reference Missing Detection ...................5-31, A-5
Square Root Activation ............................5-36, A-6
Integral Limit Setting.......................................5-30, A-5
Integral Time Setting .......................................5-29, A-5
Maximum Boost Time.....................................5-36, A-6
Offset Adjustment............................................5-30, A-5
Output ..............................................................5-30, A-5
Gain Setting..............................................5-31, A-5
Level Selection .........................................5-31, A-5
Limit .........................................................5-30, A-5
Primary Delay Time Constant ..................5-31, A-5
Square Root Monitor ................................5-37, A-6
Parameters..........................................5-22 to 5-37, A-5, A-6
Proportional Gain (PI) ....................................5-29, A-5
Setpoint......................................5-22 to 5-28, 5-33, A-6
Boost Setting ............................................5-35, A-6
Display Scaling.........................................5-33, A-6
Selection ......................................... 5-23, 5-33, A-6