TA Triumph-Adler LP 210 - Manual (Page 122)

9 Caring for and maintaining your printer
9-2 Laser Printer 200 Series
9.1 Cleaning the printer
Clean the printer at regular intervals to prevent dust, dirt and paper
residue from accumulating in and on the printer.
Cleaning the case
1 Switch the printer OFF and unplug the power cable.
2 Wipe the printer case off with a soft cloth. You may moisten the cloth
with a little neutral household cleaner if you wish.
Cleaning the paper feed roller
Clean the paper feed roller if paper feed problems occur frequently.
CAUTION
The fusing unit can become very hot!
The fusing unit, which is located beneath the top cover, can become very
hot when the printer is in operation.
➜ To prevent injuries, avoid contact with this area.
➜ After switching off the printer, wait at least 10 minutes before cleaning
the inside of the printer.
1 Switch the printer OFF and unplug the
power cable.
2 Fold down the output tray.