TA Triumph-Adler LP 210 - Manual (Page 14)

1 Introduction
1-6 Laser Printer 200 Series
Laser safety
This printer is equipped with a laser. If the printer is used in accordance
with the instructions in this User’s Manual, the laser presents no danger.
The radiation emitted is completely absorbed and attenuated by the case.
The laser radiation cannot escape at any time during the printing
procedure.
This laser printer is categorized as a Class 1 printer. This classification
means that the printer does not produce any hazardous laser radiation.
Internal laser radiation
Average radiation output:
0.6 mW at the laser aperture of the print head unit.
Wavelength: 770-810 nm
This device works with a laser diode of class 3b with invisible laser
radiation. The laser diode and the polygon mirror for sampling are
integrated in the print head unit.
The print head unit is NOT AN ITEM TO BE MAINTAINED ON SITE. You
should therefore not open it under any circumstances.
CAUTION
Dangerous laser radiation!
Using the printer in a manner other than as indicated in this manual may
result in exposure to dangerous radiation.
➜ Use the printer only according to the instructions contained in this
User’s Manual.
This is a semiconductor laser printer. The maximum radiation output of the
laser diode is 5 mW. The wavelength is 770-810 nm.