TA Triumph-Adler LP 210 - Manual (Page 29)

Unpacking, installing and setting up the printer 2
Laser Printer 200 Series 2-13
Switching the printer on and off
CAUTION
Improper handling may result in damge to the printer!
➜ Never switch off the printer while a print job is in progress, the printer
is receiving data from the computer (flashing “Stand-by“ lamp on
control panel) or the printer is being reset.
➜ Switch the power switch to "I" (ON)
in order to activate the printer.
The printer is ready for use after
approx. 23 seconds.
➜ Switch the power switch to
"0" (OFF) in order to deactivate the
printer.
✎
Saving energy is sensible!
When the printer has been inactive for a certain length of time, it
automatically switches to the POWER SAVE mode. This time period
can be adjusted via the printer tools, see page 5-9.
When the printer receives a new print job while in POWER SAVE
mode, it automatically switches to the warm-up phase.